Change Language :

twisterband

Assembly instructions for twisterband

TPE outer jacket

Design: Cable selection
When selecting cables, pay attention to particularly good abrasion and sliding properties. The ideal jacket material is TPE.
Recommendation: chainflex® cable CF9

Special shielded cables for use in the twisterband are in preparation. Please contact us if the use of shielded cables is necessary.

Design: filling

twisterband version with clasp:TB20.44.18.x.01.0 | TB30.75.22.x.01.0

A = Separate cable with separators

B = insert cable sorted by diameter or bend radius. Insert thinner, smaller ones inwards and larger ones outwards.

C = No more than two cables on top of each other. 10% of the larger diameter or min. 1 mm

D = Between all cables
10% of the larger diameter or min. 1 mm

E = Between cable and separators
10% of the larger diameteror min. 1 mm

twisterband version with Easy fastener:TB12.23.09.x.01.0 | TB20.44.12.x.01.0

A = Insert cable sorted by diameter or bend radius. Insert thinner, smaller ones towards the inside and larger ones towards the outside.

B = Between all cables min. 1 mm or 10% of the larger diameter => Ø B

C = No more than 2 cables on top of each other.
min. 1 mm or 10% of the larger diameter

Mounting: mounting bracket

1. Push the twisterband between the steel parts.

2. fix the twisterband to the connecting element by screwing it in place.

Assembly: Guide shaft

In vertical installation position from 1500° angle of rotation, use a centred shaft as guidance.

In horizontal installation position, always use a centric shaft as support.

Mounting: strain relief

- Relieve the strain on the cables at both ends
- Make sure that the knot of the cable tie does not point in the direction of the energy chain

End position:

The twisterband must not be rotated to the end. In order not to put too much strain on the cable, a reserve of at least 90° must be planned before each attachment point.

twisterband®

Assembly videos

Consulting

I look forward to answering your questions

Hennlich, Industrijska d.o.o.+385 1 3874334Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.


Online:
24h

WhatsApp-Service:
Montag – Freitag: 8 – 16 Uhr