igumid® P190, filament for 3D printing

1 od 10

Maximum strength and rigidity thanks to carbon fibre reinforcement
Suitable for structural components and multi-material components
Flexural strength up to 237 MPa, modulus of elasticity up to 11.5 GPa, improved strength in z-direction

Material profile for Bambu Lab X1/P1/H2/P2 available for download

Art. br.

P190-PF-0175-0750

Filament diameter

1,75

Net weight [g]

1088

The material profile for processing igumid P190 on Bambu Lab X1 / P1 / H2 / P2 3D printers can be found on this page in the "Downloads" tab.

Here you will find an overview of all the material profiles that we offer for download: Go to print profiles overview

High-strength filament for structural components or as a material partner for multi-material components

igumid P190 is an extremely strong and stiff 3D printed filament due to the reinforcement with carbon fibre. It was specially developed as a partner material for iglidur i190 for the production of very strong and at the same time friction-optimised components in multi-material printing. Furthermore, it can be used for printing stable structural components. Thanks to the high strength and high rigidity, as well as its low density of 1.25g/cm³, igumid P190 is ideal for lightweight construction with low material requirements.

Because of the abrasive fibres, the used printer to process the filament should have a wear-resistant (for example hardened) nozzle and extruder pinion. The Bonding agent for tribofilament can be used for better adhesion to the printing plate. The filament is very sensitive to moisture and should be stored in a drying container and actively dried regularly.
You can find design instructions for multi-material printing in our blog: Go to the blog

igumid P190 can be purchased as filament for processing with your own printer or ordered in our 3D print service via STEP file as a stand-alone component or as a 2K component in combination with iglidur i190. Further information on our in-house multi-material 3D printing service with igumid P190 and other filaments can be found here: Learn more

When to use it?

For structural components where high strength and stiffness are required
For special mounting brackets for energy chains
As a multi-material partner with iglidur i190, for the combination of a high-strength material (igumid P190) and a particularly durable plastic (iglidur i190)

When not to use it?

For friction and wear applications (→ iglidur i150 or iglidur i180 or iglidur i190)
If the application requires a food-grade material (→ iglidur i150 or iglidur i151 or iglidur A350 )
If the application temperature is higher than 120°C in the long term (→ iglidur A350 or iglidur RW370)