All-rounder e-chains® and e-tubes for high dynamics. The E4.1L series was developed to combine the advantages of the E2/000 and E4.1 series in one series. On the one hand the stability of the E4.1 system and on the other the easy accessibility and assembly of the E2/000 system. The E4.1L system is the ideal energy chain for mechanical engineering and applications where there must be an optimum relationship between technical requirements and economic efficiency.
New, very cable-friendly interior separation product range available.
Pivoting and locking mounting brackets are available.
KMA mounting brackets with all-round fixing option.
You can find the right e-chain® quickly by entering concrete parameters and with the aid of a comparison table.
Are you interested in the E4.1L system and want to see it yourself before making a final decision?
Then you are welcome to order this free sleeve .
Low weight and high strength
Ideal ratio of inner and outer dimensions with thinner outer links and optimised crossbar geometry
30% lighter and lower-priced than E4.1
e-chains® and e-tubes openable along the inner and outer radius, from both sides
Very tightly fitting lids, virtually no gaps or openings
Openable along inner and outer radius
Inside completely accessible for easy filling
Cost-effective alternative for E4.1
for unsupported applications
If the strength of the E2/000 is insufficient, but an E4.1 is too big
41dB(A) determined in the igus® laboratory, v = 1.8m/s unsupported
Electrically conductive ESD versions upon request
2014 for series R4.1L